Frequently Asked Questions
Straight answers about tile installation, materials, and what to expect.
Before the Job Starts
Do I need to remove existing tile before you arrive?
Not necessarily. In many cases we handle the demo ourselves. It depends on whether the existing tile is bonded well to the substrate and whether the substrate is worth keeping. If old tile is coming up, we will let you know during the estimate visit so you can decide whether to have us do the removal or handle it yourself ahead of time. Either way, the substrate condition is what we are really evaluating before any new tile goes down.
How do I know if my floor is ready for tile?
The two main things we check are flatness and deflection. A floor needs to be flat within 3/16 of an inch over a 10-foot span for most tile formats, and tighter than that for large-format tile. Deflection refers to how much the subfloor flexes under load. Too much flex and the tile or grout will eventually crack. We assess both during the site visit and discuss any prep work needed before the estimate is finalized.
What is the difference between porcelain and ceramic tile?
Both are fired clay products, but porcelain is denser, less porous, and harder. It is made from finer clay fired at higher temperatures, which makes it more resistant to moisture and wear. Ceramic is slightly softer and easier to cut, which can make it a reasonable choice for dry wall applications. For floors and wet areas, porcelain is generally the more durable option. That said, the quality range within each category is wide, so material choice is something we are happy to talk through based on your specific room and use.
During the Install
How long does a typical tile installation take?
It varies considerably depending on the space, the tile format, the layout pattern, and whether demo or substrate prep is involved. A straightforward bathroom floor might be done in a day. A full shower surround with a niche and a patterned floor might take three to four days. Large kitchen floor installations with diagonal layouts take longer than the same square footage in a simple grid. We give timeline estimates after seeing the space, not before.
Can I use the room while tile work is happening?
Generally not during active install, and not for some time after. Thinset mortar needs 24 hours minimum to cure before grout can go down, and grout needs additional curing time before foot traffic is appropriate. For a wet area like a shower, we typically recommend waiting 72 hours before any water exposure. We will give you specific timing guidance for your project so you can plan around it.
What is back-buttering and why does it matter?
Back-buttering means applying thinset to the back of the tile in addition to the substrate. It helps achieve full mortar coverage, which is especially important with large-format tile where air pockets underneath can cause cracking over time. Industry standards call for 95% coverage in wet areas and 80% in dry areas. Back-buttering is one of the steps that gets skipped when someone is moving fast, and it is one of the steps we do not skip.
After the Job
Does grout need to be sealed?
Sanded and unsanded cement grout are both porous and benefit from sealing, especially in wet areas, kitchens, and anywhere that sees frequent cleaning with liquids. Epoxy grout is non-porous and does not need sealing. We discuss grout type and sealing as part of the finishing conversation on every job. If sealing is recommended for your project, we can do it or walk you through doing it yourself once the grout has fully cured.
What should I do if a tile cracks or pops up after installation?
Contact us directly. A tile that pops or cracks shortly after installation is worth investigating because it usually points to something in the substrate or the bond layer. It is not always a sign of an installation error, but it is always worth looking at. We take these calls seriously and will come back to assess what happened. If the issue is within our scope of work, we address it.