Calacatta Shower Build in Elk Grove
This walk-in shower in an Elk Grove master bathroom was tiled floor-to-ceiling with large-format Calacatta marble-look porcelain. The photo captures the installation in progress, with spacers and leveling wedges still in place on the walls. Before any tile went up, a sheet-applied waterproofing membrane was installed over cement board on all wet surfaces, with extra reinforcement at corners and the curb transition. The shower floor was mud-set to a quarter-inch-per-foot slope toward the linear drain, then tiled continuously with the same Calacatta tile to create a seamless look between walls and floor.
Project Details
| Service | Bathroom Tile Installation |
|---|---|
| Area | Elk Grove |
| Materials | Large-format Calacatta marble-look porcelain, sheet waterproofing membrane, white polymer thinset |
| Scope | Residential walk-in shower, walls and floor |
| Timeline | Multi-day install |
What We Did
Installed sheet waterproofing membrane over cement board substrate, sealing all corners and penetrations
Mud-set shower floor to proper slope toward drain; allowed full cure before tiling
Set wall tile from bottom to top using leveling clips, back-buttering each piece for full mortar coverage
Grouted with white non-sanded grout, sealed grout lines and waterproofed curb edges